| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.470 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.212 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.400 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | DETAILS-EXTRUSION,HARNESS SUPPORT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 T851 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/3 T8511 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.690 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.098 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.470 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SPECIAL FEATURES | NAME SUBMITTED FOR CATALOGING:BRACKET, MOUNTING |
| STYLE DESIGNATOR | ANGLE |