|
|
|
National Stock Number:
1650-00-242-9425
Federal Supply Class:
1650
National Item Identification Number:
002429425
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 30316-1 | 64829 | ARVINMERITOR INC | | 566357 | 06840 | BENDIX CORP THE | | C1603 | 22399 | FISCHMAN CO DIV OF GRACO METAL PRODUCTS INC | | 566357 | 90005 | PUROLATOR FACET INC. | | 683-10 | 94592 | FLUID CONDITIONING PRODUCTS, INC. | | 683PCALL | 94592 | FLUID CONDITIONING PRODUCTS, INC. | | E5504A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DROP PRESSURE | 2.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 5.938 INCHES MINIMUM AND 6.000 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 3.469 INCHES MINIMUM AND 3.531 INCHES MAXIMUM | | BODY OVERALL LENGTH | 8.000 INCHES MINIMUM AND 8.062 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 75.0 POUNDS PER SQUARE INCH | | FILTRATION RATING IN MICRONS | 2.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 160.0 FAHRENHEIT MAXIMUM | | TEST DATA DOCUMENT | 81349-MILF5504 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|