|
|
|
National Stock Number:
1650-00-295-2384
Federal Supply Class:
1650
National Item Identification Number:
002952384
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 7582770 | 05228 | PTI TECHNOLOGIES INC. | | AC-7031F-1297Y3 | 18350 | PALL AEROPOWER CORPORATION | | M83860/1-12 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-83860 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-83860 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M71-005-3HC | 98748 | AIR FORCE UNITED STATES DEPARTMENT OF THE DBA TINKER AFB OC ALC DSP |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | DROP PRESSURE | 10.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.625 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.715 INCHES MINIMUM | | BODY OVERALL LENGTH | 6.400 INCHES NOMINAL | | FILTERING MEDIA DESIGN | CORRUGATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 5.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | FIBER FILTERING MEDIUM | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
|
|