| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| CONNECTION TYPE | DRAIN |
| CONNECTION TYPE | INLET |
| CONNECTION TYPE | OUTLET |
| CONNECTION DESIGN | THREADED AND ELLIPSOIDAL |
| CONNECTION GOVERNMENT SPEC/STD | AND 10050-4 AND 10050-3 |
| CONNECTION QUANTITY | 1 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.095 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| FSC APPLICATION DATA | HYDRAULIC SYSTEM AIRCRAFT |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO 160 DEG F |
| MOUNTING BOLT HOLE SPACING | 1.974 IN. BY 1.974 IN. C TO C |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 6060.0 |
| PITCH DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT PROTRUSION LENGTH | 0.781 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SPLINE LENGTH | 0.813 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.431 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.344 INCHES NOMINAL |
| SPLINE PITCH | 32/64 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 12 |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.375-24 |
| THREAD SIZE | 0.438-20 |
| TORQUE LOAD RATING | 45.4 INCH-POUNDS |