|
|
|
National Stock Number:
1650-00-357-2609
Federal Supply Class:
1650
National Item Identification Number:
003572609
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 7580596 | 05228 | PTI TECHNOLOGIES INC. | | 7580596 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | AC-8889F-6 | 18350 | PALL AEROPOWER CORPORATION | | M83870-6 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-83870 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DROP PRESSURE | 1.5 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.520 INCHES MINIMUM AND 1.540 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.873 INCHES NOMINAL | | BODY OVERALL LENGTH | 3.804 INCHES MINIMUM AND 3.829 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 200.0 POUNDS PER SQUARE INCH | | FILTRATION RATING IN MICRONS | 20.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | ACFT HYDRALIC SYSTEM | | MATERIAL | ALUMINUM ALLOY AND STEEL CORROSION RESISTING BODY | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TAPERED HOLE MAJOR DIAMETER | 0.406 INCHES NOMINAL | | TAPERED HOLE MINOR DIAMETER | 0.396 INCHES NOMINAL |
|
|