|
|
|
National Stock Number:
1650-00-585-1188
Federal Supply Class:
1650
National Item Identification Number:
005851188
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 16565 | 19156 | MOOG INC | | 16565 | 79294 | E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS | | 16565 | 94697 | MOOG INC |
|
Techincal Specification:
| BODY DIAMETER | 0.585 INCHES MINIMUM AND 0.595 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.240 INCHES MINIMUM AND 0.248 INCHES MAXIMUM | | BODY OVERALL LENGTH | 1.030 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 20.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | FSC APPLICATION DATA | CYLINDER,ACTUATING,AIRCRAFT | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS |
|
|