| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | AND10050-3,AND10050-5 AND AND10050-6 |
| CONNECTION QUANTITY | 3 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.095 CUBIC INCHES |
| CONNECTION TYPE | DRAIN |
| CONNECTION TYPE | INLET |
| CONNECTION TYPE | OUTLET |
| DISPLACEMENT TYPE | CONSTANT |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM F100 |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| PITCH DIAMETER | 0.375 INCHES NOMINAL |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| MOUNTING BOLT HOLE SPACING | 1.976 IN. BY 1.976 IN. C TO C |
| MOUNTING GOVERNMENT STANDARD | AND10260 |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 6060.0 |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE LENGTH | 0.938 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.406 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.351 INCHES NOMINAL |
| SPLINE PITCH | 32/64 |
| SPLINE QUANTITY | 12 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.500-20 |
| TORQUE LOAD RATING | 45.4 INCH-POUNDS |