| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| CONNECTION TYPE | DRAIN |
| CONNECTION TYPE | INLET |
| CONNECTION TYPE | OUTLET |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | AND10050-4,AND10050-8 AND AND10050-8 |
| CONNECTION QUANTITY | 3 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.600 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM C130 |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. C TO C |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3750.0 |
| PITCH DIAMETER | 0.600 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SPLINE LENGTH | 1.047 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.650 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.553 INCHES NOMINAL |
| SPLINE PITCH | 20/40 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 12 |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.438-20 AND 0.750-16 |
| TORQUE LOAD RATING | 286.0 INCH-POUNDS |