| DRIVE SHAFT GOVERNMENT STANDARD | AND10262 TYPE 12J |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| CONNECTION TYPE | DRAIN |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | AND10050-4 AND AND10050-6 |
| CONNECTION QUANTITY | 2 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.950 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| MATERIAL | ALUMINUM HOUSING |
| MOUNTING BOLT CIRCLE DIAMETER | 5.000 INCHES NOMINAL |
| MOUNTING GOVERNMENT STANDARD | AND 10262 TYPE 12J |
| MOUNTING HOLE DIAMETER | 0.406 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 6 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 8000.0 |
| PITCH DIAMETER | 0.800 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT PROTRUSION LENGTH | 1.543 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| SPLINE LENGTH | 1.000 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.863 INCHES MINIMUM AND 0.867 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 0.727 INCHES NOMINAL |
| SPLINE PITCH | 20/30 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 16 |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.438-20 OR 0.563-18 |
| TORQUE LOAD RATING | 560.0 INCH-POUNDS |