|
|
|
National Stock Number:
1650-00-970-9230
Federal Supply Class:
1650
National Item Identification Number:
009709230
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 128HM10086 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 128HM10086-2 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 128HM10086-2 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BORE LENGTH | 0.512 INCHES NOMINAL | | BORE RADIUS | 0.031 INCHES NOMINAL | | BORE TYPE | D-SHAPED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 2.500 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.437 INCHES MINIMUM AND 0.447 INCHES MAXIMUM | | DISTANCE FROM RADIAL CENTER TO FLAT SURFACE | 0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM | | FEATURES PROVIDED | COUNTERBORE | | LINK END HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | LINK END THICKNESS | 0.623 INCHES MINIMUM AND 0.633 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9, ALLOY 7075, T7351 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | SHAFT END THICKNESS | 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM | | SPECIAL FEATURES | OFFSET HEIGHT: 0.187 IN. NOMINAL | | STYLE DESIGNATOR | CLEVIS LINK END, SECURING HOLE(S) SHAFT END | | SURFACE TREATMENT | ANODIZE |
|
|