| DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| BODY MATERIAL | ALUMINUM ALLOY 2024 |
| EXTENDED LENGTH | 10.272 INCHES MINIMUM AND |
| 10.348 INCHES MAXIMUM |
| COMPRESSED LENGTH | 5.310 INCHES NOMINAL |
| BORE DIAMETER | 1.117 INCHES MINIMUM AND |
| 1.118 INCHES MAXIMUM |
| FIRST PISTON ROD END STYLE | BEARING TYPE |
| BODY MATERIAL | ALUMINUM ALLOY, QQ-A-200/3, ALLOY 2024, T8511 OR |
| ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T4 OR |
| ALUMINUM ALLOY,QQ-A-200/3,ALLOY 2024,T3511 |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| BODY OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.312 INCHES NOMINAL |
| FIRST END OUTSIDE DIAMETER | 1.320 INCHES NOMINAL |
| FIRST END THICKNESS AT MOUNTING HOLES | 0.730 INCHES MINIMUM AND |
| 0.735 INCHES MAXIMUM |
| MOUNTING TYPE AND LOCATION | TRUNNION CENTER SECTION |
| MOUNTING PROVISION | PIN |
| MOUNTING FACILITY DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING FACILITY LENGTH | 0.595 INCHES NOMINAL |
| PORT LOCATION AND QUANTITY | 2 CENTER SECTION |
| PORT STYLE | GASKET SEAL SINGLE PORT |
| GASKET SEAL ALL PORTS |
| PORT THREAD SERIES DESIGNATOR | UNJF SINGLE PORT |
| UNJF ALL PORTS |
| PORT THREAD DIAMETER | 0.437 INCHES NOMINAL SINGLE PORT |
| 0.500 INCHES NOMINAL ALL PORTS |
| PORT THREAD QUANTITY PER INCH | 20 SINGLE PORT |
| 20 ALL PORTS |
| PORT THREAD CLASS | 3B SINGLE PORT |
| 3B ALL PORTS |
| SEAT ANGLE IN DEG | 45.0 SINGLE PORT |
| 45.0 ALL PORTS |
| TEMP RATING | -65.0 DEG FAHRENHEIT |
| 275.0 DEG FAHRENHEIT |
| PRESSURE RATING | 1500.0 POUNDS PER SQUARE INCH NOMINAL |
| TEST DATA DOCUMENT | 97499-206-076-031 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| FSC APPLICATION DATA | HELICOPTER MODEL OH-58 HYDRAULIC SYSTEM |