| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| CONNECTION TYPE | DRAIN |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | MS33649-4 |
| CONNECTION QUANTITY | 1 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.550 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MOUNTING BOLT CIRCLE DIAMETER | 0.785 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| MOUNTING BOLT HOLE SPACING | 3.536 BY 3.536 |
| MOUNTING HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 8000.0 |
| PITCH DIAMETER | 0.500 INCHES NOMINAL |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE SOURCE CONTROL NO |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE MAJOR DIAMETER | 0.572 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.435 INCHES NOMINAL |
| SPLINE PITCH | 20/40 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 10 |
| TORQUE LOAD RATING | 384.0 INCH-POUNDS |