| END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| CASING LENGTH BETWEEN FERRULES | 44.500 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.790 INCHES NOMINAL |
| CORE DIAMETER | 0.375 INCHES NOMINAL |
| CORE OVERALL LENGTH | 46.3125 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| CORE REMOVABILITY | NONREMOVABLE |
| CROSS SECTION SIZE | 0.468 INCHES NOMINAL DIAMETER BOTH ENDS |
| END OVERALL DIAMETER | 0.875 INCHES NOMINAL BOTH ENDS |
| END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| FSC APPLICATION DATA | ACFT WING FLAP CONTROL ASSEMBLY |
| OVERALL LENGTH | 46.3125 INCHES NOMINAL |
| MATERIAL | STEEL CASING |
| MATERIAL | STEEL CORE |
| MINIMUM OPERATING RADIUS | 10.000 INCHES |
| MINOR DIAMETER | 0.2715 INCHES NOMINAL SPLINE BOTH ENDS |
| SHANK OUTSIDE DIAMETER | 0.500 INCHES NOMINAL BOTH ENDS |
| PITCH DIAMETER | 0.2917 INCHES NOMINAL BOTH ENDS |
| SCREW THREAD SERIES DESIGNATOR | UNEF BOTH ENDS |
| THREAD LOCATION | INTERNAL BOTH ENDS |
| TIP LENGTH | 0.891 INCHES NOMINAL BOTH ENDS |
| TORSIONAL DEFLECTION RATING | 100 DEG AT 100 LB IN. MAX TORSIONAL DEFLECTION RATING IN WINDING DIRECTION,148 DEG AT 60 LB IN UNWINDING DIRECTION |
| WIDTH ACROSS FLATS | 0.875 INCHES NOMINAL BOTH ENDS |
| WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| SPLINE MAJOR DIAMETER | 0.3326 INCHES NOMINAL BOTH ENDS |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 BOTH ENDS |
| SPLINE QUANTITY | 14 BOTH ENDS |
| SPLINE LENGTH | 0.469 INCHES NOMINAL BOTH ENDS |
| SPLINE TYPE | INVOLUTE BOTH ENDS |
| SURFACE TREATMENT | RUBBER CHLOROPRENE CLASS CR CASING |
| THREAD CLASS | 3B BOTH ENDS |
| THREAD DEPTH | 0.328 INCHES NOMINAL BOTH ENDS |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |