|
|
|
National Stock Number:
1680-00-631-2010
Federal Supply Class:
1680
National Item Identification Number:
006312010
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 1051C86 | 82402 | TRIUMPH GEAR SYSTEMS INC |
|
Techincal Specification:
| BORE DIAMETER | 0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM | | BORE LENGTH | 0.687 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.281 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.125 INCHES NOMINAL | | LINK END THICKNESS | 0.125 INCHES NOMINAL | | OVERALL WIDTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SHAFT END THICKNESS | 0.687 INCHES NOMINAL | | SPECIAL FEATURES | OFFSET HEIGHT: 0.562 IN. NOMINAL; SURFACE TREATMENT PER QQ-P-416, CLASS 1, TYPE 1 | | STYLE DESIGNATOR | ONE HOLE TONGUE LINK END, SECURING HOLE SHAFT END | | SURFACE TREATMENT | CADMIUM |
|
|