|
|
|
National Stock Number:
1680-00-765-0167
Federal Supply Class:
1680
National Item Identification Number:
007650167
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| A51B26504-13 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51B26504-13 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51B26504-13 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.312 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | LINK END THICKNESS | 0.081 INCHES MINIMUM AND 0.086 INCHES MAXIMUM | | MAJOR DIAMETER | 1.150 INCHES MINIMUM AND 1.163 INCHES MAXIMUM | | MATERIAL | STEEL | | MINOR DIAMETER | 0.917 INCHES MINIMUM AND 0.922 INCHES MAXIMUM | | OVERALL WIDTH | 1.376 INCHES NOMINAL | | SHAFT END THICKNESS | 0.081 INCHES MINIMUM AND 0.086 INCHES MAXIMUM | | SHAFT SECURING METHOD | SPLINE | | SPLINE QUANTITY | 12 | | STYLE DESIGNATOR | FLAT, ONE HOLE LINK END | | SURFACE TREATMENT | CADMIUM AND CHROMATE |
|
|