|
|
|
National Stock Number:
1680-00-830-9745
Federal Supply Class:
1680
National Item Identification Number:
008309745
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 204-011-313-001 | 97499 | BELL TEXTRON INC | | 204-011-313-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 3.250 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM | | LINK END THICKNESS | 0.500 INCHES NOMINAL | | MAJOR DIAMETER | 0.894 INCHES MINIMUM AND 0.908 INCHES MAXIMUM | | OVERALL WIDTH | 1.200 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367, COMP 2014, T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | MINOR DIAMETER | 0.812 INCHES MINIMUM AND 0.816 INCHES MAXIMUM | | SHAFT SECURING METHOD | SPLINE | | SHAFT END THICKNESS | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | BUSHING 85B6-15-34-16 INSTALLED IN. LINK END HOLE,ONE HOLE 0.193 IN. DIA DRILLED THRU SHAFT END 0.680 IN. FROM SPLINE CENTER | | SPLINE QUANTITY | 27 | | STYLE DESIGNATOR | FLAT, ONE HOLE LINK END | | SURFACE TREATMENT | ANODIZE |
|
|