|
|
|
National Stock Number:
1680-01-284-9869
Federal Supply Class:
1680
National Item Identification Number:
012849869
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 10330-1 | 17772 | AERO ENGINEERING & MANUFACTURING COMPANY OF CALIFORNIA, LLC | | 10330-1 | 98897 | LOCKHEED MARTIN CORP | | 10330-1 | 9G394 | GENERAL PRODUCTS, AEROSPACE AND DEFENSE LLC | | 10330-1 | 9Z181 | SHEFFIELD MANUFACTURING, INC. |
|
Techincal Specification:
| BORE DIAMETER | 0.505 INCHES MINIMUM AND 0.509 INCHES MAXIMUM | | BORE LENGTH | 1.180 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.415 INCHES MINIMUM AND 1.430 INCHES MAXIMUM | | LINK END THICKNESS | 0.093 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729, COND N MIL SPEC 1ST MATERIAL RESPONSE OR MIL-T-6736, TYPE 1, COND N MIL SPEC 2ND MATERIAL RESPONSE | | III MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | SHAFT END THICKNESS | 1.180 INCHES NOMINAL | | SPECIAL FEATURES | SURFACE TREATMENT PER C-0491, CLASS 2, TYPE 2, CAGEC 36659 | | SURFACE TREATMENT | CADMIUM |
|
|