| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | SOLID |
| DEPTH | 0.442 INCHES MINIMUM AND 0.455 INCHES MAXIMUM |
| FORWARD END DIAMETER | 4.502 INCHES MINIMUM AND 4.503 INCHES MAXIMUM |
| FORWARD END DESIGN | STRAIGHT |
| FORWARD END MAJOR DIAMETER | 1.000 INCHES NOMINAL |
| FORWARD END THREAD LENGTH | 1.500 INCHES |
| FORWARD END THREAD QUANTITY | 14 PER INCH |
| KEYWAY QUANTITY | 2 |
| KEYWAY WIDTH | 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| KEYWAY DEPTH | 0.503 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| MAJOR DIAMETER | 3.743 INCHES MINIMUM AND 3.745 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633A, COMPOSITION B FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| OUTSIDE DIAMETER | 6.000 INCHES NOMINAL |
| OVERALL LENGTH | 4.135 FEET NOMINAL |
| QUANTITY | 1 |
| SPECIAL FEATURES | 2ND KEYWAY DEPTH 0.252 IN. MIN BY 0.255 IN. MAX; 2ND KEYWAY WIDTH 0.499 IN. MIN BY 0.500 IN. MAX |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 1.000 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 5.001 INCHES MINIMUM AND 5.002 INCHES MAXIMUM |
| TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 5.938 INCHES |
| THREAD QUANTITY | 5.938 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| WIDTH | 1.248 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |