|
|
|
National Stock Number:
2010-00-352-0488
Federal Supply Class:
2010
National Item Identification Number:
003520488
Description:
SHAFT,PROPULSION,SHIP
Detail:
A shaft used to transmit to the propeller the torque generated by the main engine of a ship and also to transfer the propeller thrust to the thrust block.
|
Manufacturer Information:
| DD445S4301-2PC102 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| AFTER BEARING SLEEVE LENGTH | 5.500 FEET NOMINAL | | AFTER BEARING SLEEVE OUTSIDE DIAMETER | 17.375 INCHES NOMINAL | | AFTER END DESIGN | TAPERED | | CONSTRUCTION | HOLLOW | | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVE COVERED | | DEPTH | 0.875 INCHES NOMINAL | | FORWARD BEARING SLEEVE LENGTH | 5.854 FEET NOMINAL | | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 17.375 INCHES NOMINAL | | FORWARD END DESIGN | TAPERED | | FORWARD END TAPER LENGTH | 1.000 FEET NOMINAL | | FORWARD END TAPER MAJOR DIAMETER | 16.000 INCHES NOMINAL | | FORWARD END TAPER | 0.125 PER FOOT IN INCHES NOMINAL | | INSIDE DIAMETER | 10.875 INCHES NOMINAL | | KEYWAY DEPTH | 0.937 INCHES NOMINAL | | KEYWAY QUANTITY | 3 AND 1 | | KEYWAY WIDTH | 2.125 INCHES MINIMUM AND 2.187 INCHES MAXIMUM | | OUTSIDE DIAMETER | 16.000 INCHES NOMINAL | | OVERALL LENGTH | 42.583 FEET NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | N,49-S-2,FORGED MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROTECTIVE COVERING TYPE | RUBBER | | QUANTITY | 2 | | WIDTH | 1.875 INCHES NOMINAL | | SURFACE FINISH | SMOOTH MACHINED | | TAPER LENGTH | 2.323 FEET NOMINAL | | TAPER MAJOR DIAMETER | 18.750 INCHES NOMINAL | | TAPER | 1.000 PER FOOT IN INCHES NOMINAL | | UNIT TYPE | STERN TUBE SHAFT SECTION | | USAGE DESIGN | SD445-451,465-481,498-502,507-522,526-541,544-547,550-597,629-631,642-644,649,AND DM23-34 | | USAGE LOCATION | PORT/STARBOARD |
|
|