| AFTER BEARING SLEEVE LENGTH | 7.719 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 22.500 INCHES NOMINAL |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| DEPTH | 1.250 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 5.708 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 22.500 INCHES NOMINAL |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING LENGTH | 0.709 FEET NOMINAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 34.750 INCHES NOMINAL |
| FORWARD END COUPLING THICKNESS | 4.250 INCHES NOMINAL |
| INSIDE DIAMETER | 5.375 INCHES MINIMUM AND 14.250 INCHES MAXIMUM |
| MAJOR DIAMETER | 12.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890, CLASS AN MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| OUTSIDE DIAMETER | 20.750 INCHES NOMINAL |
| OVERALL LENGTH | 49.406 FEET NOMINAL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| SPECIAL FEATURES | SHAFT IS COLD ROLLED FOR A DISTANCE OF 12 FT 9-3/4 IN. STARTING AT THE AFT END OF THE PROPELLER TAPER |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 4.073 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 20.750 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 11.375 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE DESIGN | SUITABLE FOR DLG 6-15 |
| USAGE LOCATION | PORT/STARBOARD |
| WIDTH | 3.250 INCHES MINIMUM AND 3.313 INCHES MAXIMUM |