| AFTER BEARING SLEEVE LENGTH | 7.698 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 24.500 INCHES NOMINAL |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVE |
| DEPTH | 1.742 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 1.000 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 24.500 INCHES NOMINAL |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING LENGTH | 0.750 FEET NOMINAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 35.375 INCHES NOMINAL |
| FORWARD END COUPLING TYPE | FLANGE |
| FORWARD END COUPLING THICKNESS | 4.500 INCHES NOMINAL |
| INSIDE DIAMETER | 5.750 INCHES MINIMUM AND 14.500 INCHES MAXIMUM |
| MAJOR DIAMETER | 15.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 22.250 INCHES NOMINAL |
| OVERALL LENGTH | 43.667 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CL AN,W/O NICKEL AMEND. 4,FORGED MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER, SYNTHETIC |
| QUANTITY | 2 |
| WIDTH | 3.750 INCHES MINIMUM AND 3.812 INCHES MAXIMUM |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 3.604 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 22.250 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 13.250 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | CENTER |