| AFTER BEARING SLEEVE LENGTH | 6.250 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 17.371 INCHES MINIMUM AND 17.375 INCHES MAXIMUM |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| DEPTH | 1.625 INCHES NOMINAL |
| FURNISHED ITEMS AND QUANTITY | PROPELLER NUT,1; PROPELLER KEY,2 |
| EXTRA LONG REFERENCE NUMBER | SSBN608-203-1955601ANDSSBN608-203-1955602,W/O EPOXY RESIN INSERT,COUPLING, AND COUPLING KEYS |
| FORWARD BEARING SLEEVE LENGTH | 6.583 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 17.371 INCHES MINIMUM AND 17.375 INCHES MAXIMUM |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 1.167 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 17.250 INCHES NOMINAL |
| FORWARD END TAPER | 0.125 PER FOOT IN INCHES NOMINAL |
| INSIDE DIAMETER | 4.500 INCHES MINIMUM AND 9.000 INCHES MAXIMUM |
| KEYWAY DEPTH | 1.317 INCHES NOMINAL |
| KEYWAY QUANTITY | 3 AND 1 |
| KEYWAY WIDTH | 1.812 INCHES MINIMUM AND 1.813 INCHES MAXIMUM |
| MAJOR DIAMETER | 10.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 16.000 INCHES MINIMUM AND 16.006 INCHES MAXIMUM |
| OVERALL LENGTH | 39.786 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890, CLASS AN MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | ELRN DWG NO. SSB/N/608-203-1955601 AND SSB/N/608-203-1955602,W/O EPOXY RESIN INSERT,COUPLING,AND COUPLING KEYS; AS DIFFERENTIATED BY EXTRA LONG REFERENCE NUMBER |
| WIDTH | 2.750 INCHES MINIMUM AND 2.751 INCHES MAXIMUM |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 3.000 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 16.000 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 9.500 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | CENTER |