| AFTER END DESIGN | STRAIGHT |
| CONSTRUCTION | SOLID |
| DEPTH | 0.311 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| DIAMETER | 3.000 INCHES NOMINAL |
| FURNISHED ITEMS AND QUANTITY | JAM NUT,1,PROPELLER NUT,1 |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 0.719 FEET NOMINAL |
| FORWARD END MAJOR DIAMETER | 2.250 INCHES NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 3.000 INCHES NOMINAL |
| FORWARD END TAPER | 2.4600 PER FOOT IN INCHES MINIMUM AND 2.4620 PER FOOT IN INCHES MAXIMUM |
| FORWARD END THREAD LENGTH | 3.6875 INCHES |
| FORWARD END THREAD QUANTITY | 4-1/2 PER INCH |
| KEYWAY DEPTH | 0.311 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| KEYWAY QUANTITY | 1 |
| KEYWAY WIDTH | 0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 3.000 INCHES MINIMUM AND 3.002 INCHES MAXIMUM |
| OVERALL LENGTH | 13.000 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B21-66A,NO. 464,HOT ROLLED ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | COPPER ALLOY 464 |
| QUANTITY | 1 |
| WIDTH | 0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| SURFACE FINISH | SMOOTH MACHINED |
| UNIT TYPE | LINE SHAFT SECTION NO.1 |