|
|
|
National Stock Number:
2010-01-021-9542
Federal Supply Class:
2010
National Item Identification Number:
010219542
Description:
SHAFT,PROPULSION,SHIP
Detail:
A shaft used to transmit to the propeller the torque generated by the main engine of a ship and also to transfer the propeller thrust to the thrust block.
|
Manufacturer Information:
| 41UT 4303-3 REV.A PIECE 1 | 81340 | UNITED STATES COAST GUARD DBA USCG SFLC | | 41UT-4301-7 | 81340 | UNITED STATES COAST GUARD DBA USCG SFLC |
|
Techincal Specification:
| AFTER END DESIGN | TAPERED | | CONSTRUCTION | SOLID | | DEPTH | 0.251 INCHES MINIMUM AND 0.254 INCHES MAXIMUM | | FORWARD END DIAMETER | 2.000 INCHES NOMINAL | | FORWARD END DESIGN | STRAIGHT | | KEYWAY QUANTITY | 1 | | KEYWAY WIDTH | 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | KEYWAY DEPTH | 0.251 INCHES MINIMUM AND 0.254 INCHES MAXIMUM | | MAJOR DIAMETER | 1.500 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | OUTSIDE DIAMETER | 2.000 INCHES NOMINAL | | OVERALL LENGTH | 9.833 FEET NOMINAL | | QUANTITY | 1 | | SPECIAL FEATURES | KEYWAY ON AFT AND FORWARD END IS 4 1/4 INCHES MIN. LENGTH. SHAFT EXTENDS 1/2 INCH PAST THREADED PROPELLER HEAD WITH A 13/64 INCH HOLE DRILLED FOR A 3/16 INCH COTTER PIN FOR EXTRA SAFTEY OF LOCKNUT ON AFT END | | TAPER LENGTH | 0.479 FEET NOMINAL | | TAPER MAJOR DIAMETER | 2.000 INCHES NOMINAL | | TAPER | 0.750 PER FOOT IN INCHES NOMINAL | | THREAD LENGTH | 2.625 INCHES | | THREAD QUANTITY | 6 PER INCH | | UNIT TYPE | PROPELLER SHAFT SECTION | | USAGE LOCATION | PORT/STARBOARD | | WIDTH | 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
|