| AFTER BEARING SLEEVE LENGTH | 5.500 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 22.995 INCHES MINIMUM AND 23.000 INCHES MAXIMUM |
| AFTER END COUPLING DESIGN | INTEGRAL |
| AFTER END DESIGN | STRAIGHT |
| CONSTRUCTION | HOLLOW |
| COUPLING OUTSIDE DIAMETER | 41.245 INCHES MINIMUM AND 41.250 INCHES MAXIMUM |
| COUPLING THICKNESS | 7.250 INCHES NOMINAL |
| CUBIC MEASURE | 739584.000 CUBIC INCHES |
| DIAMETER | 21.000 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 3.000 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 20.245 INCHES MINIMUM AND 20.250 INCHES MAXIMUM |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 14.372 INCHES MINIMUM AND 14.374 INCHES MAXIMUM |
| FORWARD END COUPLING THICKNESS | 3.625 INCHES NOMINAL |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 1.375 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 17.825 INCHES MINIMUM AND 17.828 INCHES MAXIMUM |
| FORWARD END TAPER | 0.125 PER FOOT IN INCHES NOMINAL |
| INSIDE DIAMETER | 9.000 INCHES MINIMUM AND 9.001 INCHES MAXIMUM |
| KEYWAY DEPTH | 1.500 INCHES NOMINAL |
| KEYWAY QUANTITY | 4 |
| KEYWAY WIDTH | 3.750 INCHES NOMINAL AND 3.812 INCHES NOMINAL |
| OUTSIDE DIAMETER | 18.000 INCHES NOMINAL |
| OVERALL LENGTH | 34.850 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23284 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SURFACE FINISH | GROUND/POLISHED |
| UNIT TYPE | TAIL SHAFT SECTION |
| UNPACKAGED UNIT WEIGHT | 31576.000 POUNDS NOMINAL |
| USAGE LOCATION | PORT/STARBOARD |