|
|
|
National Stock Number:
2520-00-248-3748
Federal Supply Class:
2520
National Item Identification Number:
002483748
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| A50378 | 10988 | CNH INDUSTRIAL AMERICA LLC |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | FIRST END TYPE | FLANGED | | FLANGE OUTSIDE DIAMETER | 11.247 INCHES NOMINAL | | FLANGE OVERALL THICKNESS | 1.260 INCHES NOMINAL | | FLANGE THICKNESS AT MOUNTING HOLE | 0.818 INCHES NOMINAL | | HOLE DIAMETER | 0.754 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 4340H ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4340H | | METALLIC HARDNESS RATING | 50.0 MAXIMUM ROCKWELL C | | MOUNTING FACILITY TYPE AND QUANTITY | 7 UNTHREADED HOLE | | OVERALL LENGTH | 11.875 INCHES NOMINAL | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END SPLINE MAJOR DIAMETER | 3.242 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 2.886 INCHES NOMINAL | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 | | SECOND END SPLINE QUANTITY | 25 | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END TYPE | SPLINED | | SECOND END PITCH DIAMETER | 3.125 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 3.000 INCHES NOMINAL |
|
|