|
|
|
National Stock Number:
2520-00-368-4875
Federal Supply Class:
2520
National Item Identification Number:
003684875
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 1797605 | 24617 | GENERAL MOTORS CORP | | 1797605 | 7X677 | GENERAL MOTORS LLC | | 3202Q1421 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 667339 | 58275 | SASCO INC CANADIAN DIV | | 3202Q1421 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | FIRST END TYPE | FLANGED | | FLANGE HOLE TAPER | 6.048 INCHES NOMINAL PER FOOT | | FLANGE OUTSIDE DIAMETER | 6.000 INCHES NOMINAL | | FLANGE OVERALL THICKNESS | 0.750 INCHES NOMINAL | | FLANGE THICKNESS AT MOUNTING HOLE | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 45.625 INCHES NOMINAL | | MATERIAL | STEEL | | MOUNTING FACILITY TYPE AND QUANTITY | 8 TAPERED HOLE AND 2 THREADED HOLE | | SCREW THREAD SERIES DESIGNATOR | UNC | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 29.0 | | SECOND END SPLINE QUANTITY | 16 | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END TYPE | SPLINED | | SECOND END PITCH DIAMETER | 1.527 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 3.000 INCHES NOMINAL | | TAPER MAJOR DIAMETER | 0.720 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SIZE | 3/8-16 |
|
|