| BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL |
| BOLT HOLE QUANTITY | 4 |
| BOLT HOLE SPACING | ON 2-55/64 IN. BY 2-1/2 IN. CENTER /APPROX/ |
| FLANGE BOLT HOLE DIAMETER | 0.375 INCHES NOMINAL |
| FLANGE BOLT HOLE SPACING | SPACED ON 1-23/32 IN. BY 3-20/32 IN. CENTERS |
| FLANGE MOUNTING FACE LENGTH | 3.750 INCHES MINIMUM AND 4.938 INCHES MAXIMUM |
| FLANGE MOUNTING FACE WIDTH | 2.375 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| INPUT SHAFT END TYPE | FLANGED |
| OUTPUT SHAFT END QUANTITY | 3 |
| OUTPUT SHAFT END TYPE | FLANGED |
| OUTPUT FLANGE LOCATION | ON FRONT AND REAR OUTPUT SHAFTS |
| OVERALL HEIGHT | 23.875 INCHES NOMINAL |
| OVERALL LENGTH | 17.750 INCHES NOMINAL |
| OVERALL WIDTH | 16.875 INCHES NOMINAL |
| MOUNTING FACE LENGTH | 3.750 INCHES NOMINAL |
| MOUNTING FACE WIDTH | 3.500 INCHES NOMINAL |
| MOUNTING FLANGE BOLT HOLE QUANTITY | 4 |
| MOUNTING HOLE DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING HOLE SPACING | 2 HOLES ON EACH MTG BOSS,2 MTG BOSSES ON EACH SIDE HOLES SPACED 2-3/4 IN. C TO C VERTICALLY HORIZONTAL SPACING NOT STATED |
| MOUNTING HOLE THREAD CLASS | 3A |
| MOUNTING HOLE QUANTITY | 8 |
| MOUNTING THREAD SERIES | UNC |
| MOUNTING THREADS PER INCH | 13 |