|
|
|
National Stock Number:
2520-00-737-2138
Federal Supply Class:
2520
National Item Identification Number:
007372138
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 12C7046 | 95201 | NAPCO INTERNATIONAL LLC | | 364938 | 65282 | WHITE MOTOR CORP | | 7372138 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | A3802E551 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | A3802E551 | 63734 | KAITLIN CORP | | A3802E551 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | BB5112 | 56442 | DIAMOND REO TRUCK CO |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | SECOND END TYPE | SPLINED | | SECOND END BEARING SEAT | NOT INCLUDED | | MATERIAL | STEEL | | METALLIC HARDNESS RATING | 35.0 MINIMUM ROCKWELL C AND | | 45.0 MAXIMUM ROCKWELL C | | OVERALL LENGTH | 41.188 INCHES NOMINAL | | FIRST END TYPE | SPLINED | | FIRST END SPLINE TYPE | STRAIGHT | | FIRST END SPLINE QUANTITY | 12 | | FIRST END SPLINE LENGTH | 2.9062 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.859 INCHES MINIMUM AND | | 1.861 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 1.600 INCHES MINIMUM AND | | 1.608 INCHES MAXIMUM | | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE | | FIRST END FACILITY WIDTH | 0.151 INCHES MINIMUM AND | | 0.154 INCHES MAXIMUM | | FIRST END FACILITY DIAMETER | 1.655 INCHES MINIMUM AND | | 1.662 INCHES MAXIMUM | | FIRST END FACILITY LOCATION | LOCATED 2.408 IN. MIN.,2.418 IN. MAX FROM STRAIGHT SPLINE | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END SPLINE QUANTITY | 16 | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 29.0 | | SECOND END PITCH DIAMETER | 1.879 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.750 INCHES NOMINAL | | END HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | DRILLED HOLE DIAMETER | 0.982 INCHES MINIMUM AND | | 0.985 INCHES MAXIMUM | | HOLE DEPTH | 0.531 INCHES NOMINAL |
|
|