| FIRST END BEARING SEAT DIAMETER | 1.378 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| FIRST END BEARING SEAT WIDTH | 1.000 INCHES MINIMUM AND 1.219 INCHES MAXIMUM |
| FIRST END BEARING SEAT | INCLUDED |
| FIRST END KEYWAY DEPTH | 0.127 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| FIRST END DISTANCE FROM BEARING SEAT TO END | 4.031 INCHES MINIMUM AND 5.500 INCHES MAXIMUM |
| FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | SHOULDER |
| FIRST END FACILITY DIAMETER | 1.562 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| FIRST END FACILITY WIDTH | 0.125 INCHES NOMINAL |
| FIRST END FACILITY LOCATION | LOCATED 5-1/4 IN. FROM SHAFT END |
| FIRST END TAPER MAJOR DIAMETER | 1.373 INCHES NOMINAL |
| FIRST END TAPER | 1.000 INCHES NOMINAL PER FOOT |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| FIRST END THREAD SIZE | 1-14 |
| FIRST END KEYWAY WIDTH | 0.2485 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM |
| FIRST END PIN HOLE DIAMETER | 0.172 INCHES NOMINAL |
| FIRST END TYPE | TAPERED |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1033 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1033 |
| OVERALL LENGTH | 29.6775 INCHES MINIMUM AND 29.7275 INCHES MAXIMUM |
| SECOND END BEARING SEAT | NOT INCLUDED |
| SECOND END SPLINE LENGTH | 1.500 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.271 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.039 INCHES MINIMUM AND 1.049 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 10 |
| SECOND END SPLINE TYPE | STRAIGHT |
| SECOND END TYPE | SPLINED |