| FIRST END BEARING SEAT DIAMETER | 1.558 INCHES MINIMUM AND 1.563 INCHES MAXIMUM |
| FIRST END BEARING SEAT WIDTH | 1.250 INCHES NOMINAL |
| FIRST END BEARING SEAT | INCLUDED |
| FIRST END DISTANCE FROM BEARING SEAT TO END | 1.063 INCHES NOMINAL |
| FIRST END TYPE | FLANGED |
| FLANGE OUTSIDE DIAMETER | 5.305 INCHES MINIMUM AND 5.315 INCHES MAXIMUM |
| FLANGE OVERALL THICKNESS | 1.063 INCHES NOMINAL |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
| HOLE DIAMETER | 0.437 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 8650 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 8650 |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE(S) AND 2 THREADED HOLE(S) |
| OVERALL LENGTH | 30.719 INCHES MINIMUM AND 30.781 INCHES MAXIMUM |
| SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| SECOND END BEARING SEAT | NOT INCLUDED |
| SECOND END SPLINE LENGTH | 2.375 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.6345 INCHES MINIMUM AND 1.6445 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.440 INCHES MINIMUM AND 1.450 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 10 |
| SECOND END SPLINE TYPE | STRAIGHT |
| SECOND END TYPE | SPLINED |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SIZE | 7/16-14 |