|
|
|
National Stock Number:
2520-00-752-1730
Federal Supply Class:
2520
National Item Identification Number:
007521730
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 1401D4 | 22852 | SPALLA INC | | 2520007521730 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 7521730 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 3202Q2513 | 63734 | KAITLIN CORP | | 3203-Q-2513 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 2520007521730 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | SECOND END TYPE | SPLINED | | SECOND END BEARING SEAT | NOT INCLUDED | | MATERIAL | STEEL COMP 1046 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633, FS1046-CANCELED FED SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 41.031 INCHES NOMINAL | | FIRST END TYPE | FLANGED | | FLANGE OVERALL THICKNESS | 1.813 INCHES NOMINAL | | FLANGE THICKNESS AT MOUNTING HOLE | 0.500 INCHES NOMINAL | | FLANGE OUTSIDE DIAMETER | 6.427 INCHES MINIMUM AND | | 6.447 INCHES MAXIMUM | | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE | | HOLE DIAMETER | 0.504 INCHES MINIMUM AND | | 0.506 INCHES MAXIMUM | | SECOND END SPLINE TYPE | STRAIGHT | | SECOND END SPLINE QUANTITY | 16 | | SECOND END SPLINE LENGTH | 1.375 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.622 INCHES MINIMUM AND | | 1.627 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 1.489 INCHES MINIMUM AND | | 1.501 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19207 | | DESIGN CONTROL REFERENCE | 7521730 |
|
|