|
|
|
National Stock Number:
2520-00-758-0052
Federal Supply Class:
2520
National Item Identification Number:
007580052
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 15193 | 44185 | TLD WOLLARD LLC | | 15193 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 3802C1251 | 29637 | S&S TRUCK PARTS, LLC | | 3802C1251 | 56152 | ELDER AND CO | | 3802C1251 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 3802C1251 | 79780 | MERITOR HEAVY VEHICLE SYSTEMS LLC OFF HIGHWAY PRODUCTS AND SUPPLY DIV HEAVY VEHICLES COMPONENTS OPNS | | A3802C1251 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | A3802C1251 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | A3802-L-125 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | A3802L1251 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | A3802C1251 | 79780 | MERITOR HEAVY VEHICLE SYSTEMS LLC OFF HIGHWAY PRODUCTS AND SUPPLY DIV HEAVY VEHICLES COMPONENTS OPNS |
|
Techincal Specification:
| FIRST END BEARING SEAT DIAMETER | 2.000 INCHES NOMINAL | | FIRST END BEARING SEAT WIDTH | 1.375 INCHES NOMINAL | | FIRST END BEARING SEAT | INCLUDED | | FIRST END DISTANCE FROM BEARING SEAT TO END | 4.000 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.745 INCHES NOMINAL | | FIRST END SPLINE PRESSURE ANGLE IN DEG | 30.0 | | FIRST END SPLINE QUANTITY | 20 | | FIRST END SPLINE TYPE | INVOLUTE | | FIRST END PITCH DIAMETER | 1.812 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 2.188 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.875 INCHES NOMINAL | | FIRST END TYPE | SPLINED | | MATERIAL | STEEL | | OVERALL LENGTH | 21.000 INCHES NOMINAL | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END PITCH DIAMETER | 1.625 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.312 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.740 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.580 INCHES NOMINAL | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 | | SECOND END SPLINE QUANTITY | 16 | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END TYPE | SPLINED | | SPECIAL FEATURES | FIRST END THD 1.250-18 UNEF |
|
|