|
|
|
National Stock Number:
2520-00-927-3333
Federal Supply Class:
2520
National Item Identification Number:
009273333
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 30961 | 72447 | DANA COMMERCIAL VEHICLE MANUFACTURING, LLC | | 30961-1 | 72447 | DANA COMMERCIAL VEHICLE MANUFACTURING, LLC | | 919614 | 34623 | AM GENERAL LLC |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | FIRST END TYPE | FLANGED | | FLANGE OUTSIDE DIAMETER | 5.062 INCHES NOMINAL | | FLANGE OVERALL THICKNESS | 0.875 INCHES NOMINAL | | FLANGE THICKNESS AT MOUNTING HOLE | 0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM | | HOLE DIAMETER | 0.468 INCHES NOMINAL | | III MATERIAL | STEEL,SAE 1038 | | PROPRIETARY CHARACTERISTICS | PACS | | METALLIC HARDNESS RATING | 40.0 MAXIMUM ROCKWELL C | | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE | | OVERALL LENGTH | 36.562 INCHES MINIMUM | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END TYPE | SPLINED | | SECOND END PITCH DIAMETER | 1.438 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 1.625 INCHES NOMINAL | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 | | SECOND END SPLINE QUANTITY | 23 | | SECOND END SPLINE TYPE | INVOLUTE |
|
|