| FIRST END BEARING SEAT | NOT INCLUDED |
| FIRST END FACILITY DIAMETER | 1.031 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| FIRST END FACILITY LOCATION | 1.250 IN. BETWEEN GROOVE AND SHOULDER,0.312 IN. FROM END OF SHAFT |
| FIRST END FACILITY WIDTH | 0.125 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE AND SHOULDER |
| FIRST END SPLINE LENGTH | 1.619 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.495 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.265 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 6 |
| FIRST END SPLINE TYPE | STRAIGHT |
| FIRST END TYPE | SPLINED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4130 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 12.781 INCHES NOMINAL |
| MATERIAL | STEEL COMP 4130 |
| METALLIC HARDNESS RATING | 42.0 MAXIMUM ROCKWELL C |
| SECOND END DISTANCE FROM BEARING SEAT TO END | 2.750 INCHES NOMINAL |
| SECOND END BEARING SEAT DIAMETER | 1.312 INCHES NOMINAL |
| SECOND END BEARING SEAT WIDTH | 1.156 INCHES NOMINAL |
| SECOND END BEARING SEAT | INCLUDED |
| SECOND END PITCH DIAMETER | 1.136 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SECOND END SPLINE QUANTITY | 19 |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END TYPE | SPLINED |