|
|
|
National Stock Number:
2520-01-175-1429
Federal Supply Class:
2520
National Item Identification Number:
011751429
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 3202T8522 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 3202T8522 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | N8576 | 10988 | CNH INDUSTRIAL AMERICA LLC |
|
Techincal Specification:
| SECOND END PITCH DIAMETER | 2.050 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.500 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 2.100 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.985 INCHES NOMINAL | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 37.5 | | SECOND END SPLINE QUANTITY | 41 | | SECOND END SPLINE TYPE | INVOLUTE | | FIRST END BEARING SEAT | NOT INCLUDED | | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE | | FIRST END FACILITY DIAMETER | 2.000 INCHES NOMINAL | | FIRST END FACILITY LOCATION | 0.340 IN. FROM SHAFT END | | FIRST END FACILITY WIDTH | 0.160 INCHES NOMINAL | | FIRST END TYPE | SPLINED | | FIRST END SPLINE LENGTH | 3.320 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 2.127 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 2.000 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 22 | | FIRST END SPLINE TYPE | STRAIGHT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 47.440 INCHES NOMINAL | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END TYPE | SPLINED |
|
|