| FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| FIRST END TYPE | FLANGED |
| FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| OVERALL LENGTH | 29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| SECOND END GEAR TEETH QUANTITY | 32 |
| SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END TYPE | SPLINED |
| SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |