| ACTUATION METHOD | DIRECT |
| BODY MATERIAL | ANY ACCEPTABLE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 3.438 INCHES NOMINAL |
| COMPRESSED LENGTH | 7.281 INCHES NOMINAL |
| EXTENDED LENGTH | 8.719 INCHES NOMINAL |
| FEATURES PROVIDED | FILLER PLUG AND RUBBER BOOT |
| FIRST END EXTERNAL THREAD LENGTH | 0.812 INCHES NOMINAL |
| FIRST END OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED |
| FIRST PISTON ROD END THREAD CLASS | 2B |
| FIRST PISTON ROD END THREAD DIAMETER | 0.438 INCHES NOMINAL |
| FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND |
| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 20 |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF |
| PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
| PORT STYLE | GASKET SEAL |
| PORT THREAD CLASS | 2B |
| PORT THREAD DIAMETER | 0.500 INCHES NOMINAL |
| PORT THREAD QUANTITY PER INCH | 20 |
| PORT THREAD SERIES DESIGNATOR | UNF |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY DIAMETER | 0.391 INCHES NOMINAL |
| MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| MOUNTING TYPE AND LOCATION | BOSS CENTER SECTION |
| OVERALL DIAMETER | 1.938 INCHES NOMINAL |
| OVERALL HEIGHT | 4.250 INCHES NOMINAL |
| OVERALL WIDTH | 2.250 INCHES NOMINAL |
| RESERVOIR TYPE | INTEGRAL |
| SPECIAL FEATURES | PISTON ROD END THD FEMALE STYLE,0.812 IN.DEEP THD |
| STRAIGHT BORE INSIDE DIAMETER | 1.000 INCHES NOMINAL |