|
|
|
National Stock Number:
2590-00-345-8026
Federal Supply Class:
2590
National Item Identification Number:
003458026
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 10920719 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 25903458026 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| BORE DIAMETER | 0.752 INCHES MINIMUM AND 0.755 INCHES MAXIMUM | | BORE LENGTH | 1.406 INCHES MINIMUM AND 1.437 INCHES MAXIMUM | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 6.750 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.600 INCHES MINIMUM AND 0.605 INCHES MAXIMUM | | LINK END HOLE DIAMETER | 0.375 INCHES MINIMUM AND 0.377 INCHES MAXIMUM | | LINK END THICKNESS | 1.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-19098 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC POLYAMIDE (NYLON) | | SHAFT END THICKNESS | 1.422 INCHES MINIMUM AND 1.437 INCHES MAXIMUM | | SPECIAL FEATURES | OFFSET HEIGHT: 0.419 IN. NOMINAL |
|
|