|
|
|
National Stock Number:
2910-00-361-2490
Federal Supply Class:
2910
National Item Identification Number:
003612490
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 5576487 | 24617 | GENERAL MOTORS CORP | | 5576487 | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV | | 7B8259 | 11083 | CATERPILLAR INC | | T606 | 24617 | GENERAL MOTORS CORP | | PM-7B8259 | 56367 | PARMA INDUSTRIES INC | | 5576487 | 7X677 | GENERAL MOTORS LLC | | T606 | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV | | T606 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| BODY DIAMETER | 1.750 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.438 INCHES NOMINAL | | BODY OVERALL LENGTH | 7.750 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | COTTON FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
|
|