|
|
|
National Stock Number:
2910-01-238-1821
Federal Supply Class:
2910
National Item Identification Number:
012381821
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 04964322 | 89926 | NEW HOLLAND CONSTRUCTION | | 33281 | 33457 | CUMMINS FILTRATION INC | | FF0503900 | 33457 | CUMMINS FILTRATION INC | | FF5039 | 33457 | CUMMINS FILTRATION INC | | SAS014568 | 3589G | SCHAFER A SYKORA S.R.O. | | 33281 | 79396 | WIX CORP |
|
Techincal Specification:
| BODY DIAMETER | 4.300 INCHES NOMINAL | | BODY OVERALL LENGTH | 7.000 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | STEEL BODY | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 0.750 INCHES | | SPECIAL FEATURES | USED ON ALLIS CHALMERS DOZER MODELS FL9 AND FL14 | | STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | THREAD SERIES DESIGNATOR | UNF |
|
|