| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.513 INCHES MINIMUM AND 0.523 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 3.940 INCHES MINIMUM AND 4.010 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.060 INCHES MINIMUM AND 5.130 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.890 INCHES MINIMUM AND 3.910 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.900 INCHES NOMINAL |
| FURNISHED ITEMS | LOCKWASHER AND NUT |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| GROUND POLARITY TYPE | NEGATIVE |
| GROUNDING METHOD | EXTERNAL |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 5000 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 12-1/2 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNS |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| SECOND STEP DIAMETER | 0.874 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD LENGTH | 0.625 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 18 |
| UNTHREADED PORTION LENGTH | 1.260 INCHES MINIMUM AND 2.175 INCHES MAXIMUM |
| VOLTAGE IN VOLTS | 24.0 |