2930-00-231-7383 PARTS KIT,ENGINE WATER PUMP Index 2920-00-231-7385 ROTOR,GENERATOR

National Stock Number:
2920-00-231-7384

Federal Supply Class:
2920

National Item Identification Number:
002317384

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
104590771LW55BORGWARNER PDS (ANDERSON), L.L.C.
111722716764GENERAL MOTORS CORP DELCO REMY DIV
111722816764GENERAL MOTORS CORP DELCO REMY DIV
111722824617GENERAL MOTORS CORP
111722724617GENERAL MOTORS CORP
111722861928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
VZ46410SAT8KOMATSU AMERICA CORP.
111724216764GENERAL MOTORS CORP DELCO REMY DIV
11172421LW55BORGWARNER PDS (ANDERSON), L.L.C.
111724261928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
1299082H9192679NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/
511146C9192679NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/


Techincal Specification:
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG0.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG180.0
BOTTOM MOUNTING HOLE DIAMETER0.518 INCHES NOMINAL
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET3.975 INCHES NOMINAL
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET5.325 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.900 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.900 INCHES NOMINAL
FURNISHED ITEMSBOLT AND COOLING FAN AND LOCKWASHER AND NUT
ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
GROUND POLARITY TYPENEGATIVE
GROUNDING METHODEXTERNAL
MAXIMUM OUTPUT CURRENT RATING IN AMPS75.0
MOUNTING HOLE THREAD CLASS2B
MOUNTING HOLE THREAD DIAMETER0.500 INCHES NOMINAL
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD QUANTITY PER INCH12-1/2
MOUNTING HOLE THREAD SERIES DESIGNATORUNS
MOUNTING STYLEBRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED
RECTIFIER LOCATIONSEPARATE
SECOND STEP DIAMETER0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM
SHAFT ROTATION DIRECTIONCLOCKWISE OR COUNTERCLOCKWISE
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED
SPECIAL FEATURESHEX HOLE IN SHAFT END,2.260 IN. DEPTH,0.315 ACROSS FLATS
SUBMERSIBILITYNONSUBMERSIBLE
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A
THREAD DIAMETER0.625 INCHES NOMINAL
THREAD SERIESUNF
THREAD QUANTITY PER INCH18
VOLTAGE IN VOLTS12.0


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us