| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 45.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 90.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1500 |
| DISTANCE FROM END TO KEYWAY CENTER | 0.875 INCHES NOMINAL |
| DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | 3.000 INCHES NOMINAL |
| DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | 6.000 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| FURNISHED ITEMS | OVERLOAD PROTECTIVE DEVICE |
| KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 5.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 3000 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 900 |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 24 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| MOUNTING STYLE | BODY MTD W/FOUR THREADED MTG HOLES |
| SECOND STEP DIAMETER | 0.750 INCHES NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES | UNF |
| UNTHREADED PORTION LENGTH | 0.750 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 32.0 |