| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 169.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2000 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.312 INCHES NOMINAL |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.250 INCHES NOMINAL |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.250 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.625 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 0.333 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| FURNISHED ITEMS | COOLING FAN AND DRIVE PULLEY |
| KEYWAY LENGTH | 0.500 INCHES NOMINAL |
| KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| LARGEST DIAMETER | 0.625 INCHES NOMINAL |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 10.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 2050 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 1850 |
| MOUNTING HOLE QUANTITY | 3 |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD CLASS | 1B |
| MOUNTING HOLE THREAD DIAMETER | 0.250 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 20 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPECIAL FEATURES | EXTERNAL BLAST COOLING |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| TERMINAL QUANTITY | 2 |
| TERMINAL TYPE | THREADED STUD |
| UNPACKAGED UNIT LENGTH | 8.750 INCHES NOMINAL |
| UNPACKAGED UNIT HEIGHT | 5.250 INCHES NOMINAL |
| UNPACKAGED UNIT WIDTH | 5.250 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 1.125 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 24.0 |