| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 21.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1650 |
| BOTTOM MOUNTING HOLE DIAMETER | 1.125 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.125 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.851 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| GROUND POLARITY TYPE | NEGATIVE |
| GROUNDING METHOD | INTERNAL |
| KEYWAY LENGTH | 1.000 INCHES NOMINAL |
| KEYWAY WIDTH | 0.250 INCHES NOMINAL |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 100.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 1600 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| RECTIFIER LOCATION | INTEGRAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END W/KEYWAY |
| SUBMERSIBILITY | SUBMERSIBLE |
| VOLTAGE IN VOLTS | 28.0 |