2920-00-371-5079 GENERATOR,ENGINE ACCESSORY Index 2920-00-371-5084 GENERATOR,ENGINE ACCESSORY

National Stock Number:
2920-00-371-5080

Federal Supply Class:
2920

National Item Identification Number:
003715080

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
1095D13841TIFFIN PARTS, L.L.C.
110097216764GENERAL MOTORS CORP DELCO REMY DIV
110172616764GENERAL MOTORS CORP DELCO REMY DIV
11017261LW55BORGWARNER PDS (ANDERSON), L.L.C.
11009721LW55BORGWARNER PDS (ANDERSON), L.L.C.
110097224617GENERAL MOTORS CORP
110172624617GENERAL MOTORS CORP
110173824617GENERAL MOTORS CORP
51602D31007NAVISTAR INTL CORP
58004D31007NAVISTAR INTL CORP
51602D89346NAVISTAR INTL CORP TRUCK BR OHIO PLANT
58004D92679NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/


Techincal Specification:
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG193.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG164.0
BOTTOM MOUNTING HOLE DIAMETER0.316 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET6.118 INCHES MINIMUM AND 6.136 INCHES MAXIMUM
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET6.868 INCHES MINIMUM AND 6.886 INCHES MAXIMUM
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.062 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.062 INCHES NOMINAL
DISTANCE FROM END TO KEYWAY CENTER1.141 INCHES NOMINAL
FURNISHED ITEMSBOLT AND WOODRUFF KEY
KEYWAY LENGTH0.625 INCHES NOMINAL
KEYWAY WIDTH0.125 INCHES NOMINAL
MOUNTING HOLE THREAD DIAMETER0.312 INCHES NOMINAL
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD QUANTITY PER INCH18
MOUNTING HOLE THREAD SERIES DESIGNATORUNC
MOUNTING STYLEBRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED
SECOND STEP DIAMETER0.669 INCHES NOMINAL
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED, W/KEYWAY
SHAFT ROTATION DIRECTIONCLOCKWISE
SUBMERSIBILITYNONSUBMERSIBLE
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.484 INCHES NOMINAL
THREAD PITCH DIAMETERS+0.6324 TO 0.6365 INCHES
THREAD SERIESUNS
UNTHREADED PORTION LENGTH1.250 INCHES NOMINAL
VOLTAGE IN VOLTS12.0


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us