| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1800 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES NOMINAL |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.118 INCHES MINIMUM AND 8.132 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| GROUNDING METHOD | INTERNAL |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| SHAFT DRIVE END STYLE | SPLINED SHAFT END, THREADED |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE LENGTH | 2.000 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 0.763 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| SPLINE QUANTITY | 13 |
| SPLINE WIDTH | 0.196 INCHES NOMINAL |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.844 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 18 |
| VOLTAGE IN VOLTS | 24.0 |