| DISTANCE FROM MOUNTING HOLE CENTER TO END OF HOUSING | 1.500 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 330.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2000 |
| COUNTERSUNK MOUNTING HOLE ANGLE IN DEG | 30.0 |
| DISTANCE FROM END TO KEYWAY CENTER | 1.000 INCHES NOMINAL |
| FURNISHED ITEMS | VOLTAGE REGULATOR AND WOODRUFF KEY |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| GROUNDING METHOD | EXTERNAL |
| KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 10.0 |
| MOUNTING HOLE DEPTH | 0.500 INCHES NOMINAL |
| MOUNTING HOLE SMALLEST DIAMETER | 0.312 INCHES NOMINAL |
| MOUNTING HOLE LARGEST DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING PILOT DEPTH | 2.594 INCHES NOMINAL |
| MOUNTING PILOT OUTSIDE DIAMETER | 3.246 INCHES MINIMUM AND 3.248 INCHES MAXIMUM |
| MOUNTING STYLE | PILOT MTD W/TWO MTG HOLES |
| SECOND STEP DIAMETER | 0.7495 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.438 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 20 |
| UNTHREADED PORTION LENGTH | 1.188 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 12.0 |