2920-00-735-4459 STARTER,ENGINE,ELECTRICAL Index 2910-00-735-4461 CARBURETOR,FLOAT

National Stock Number:
2920-00-735-4460

Federal Supply Class:
2920

National Item Identification Number:
007354460

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
10A1665781240WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT INC
110040516764GENERAL MOTORS CORP DELCO REMY DIV
11004051LW55BORGWARNER PDS (ANDERSON), L.L.C.
110040524617GENERAL MOTORS CORP
110040561928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT


Techincal Specification:
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG196.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG164.0
BOTTOM MOUNTING HOLE DIAMETER0.320 INCHES NOMINAL
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET6.127 INCHES NOMINAL
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET6.947 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.062 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.062 INCHES NOMINAL
ENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FUNGUS RESISTANT
KEYWAY WIDTH0.125 INCHES NOMINAL
KEYWAY LENGTH0.625 INCHES NOMINAL
MAXIMUM OUTPUT CURRENT RATING IN AMPS20.0
MAXIMUM RATED ARMATURE SPEED IN RPM2300
MOUNTING HOLE THREAD CLASS2B
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD DIAMETER0.312 INCHES NOMINAL
MOUNTING HOLE THREAD QUANTITY PER INCH18
MOUNTING HOLE THREAD SERIES DESIGNATORUNC
MOUNTING STYLEBRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED
RECTIFIER LOCATIONSEPARATE
SECOND STEP DIAMETER0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED, W/KEYWAY
SHAFT ROTATION DIRECTIONCLOCKWISE
SUBMERSIBILITYNONSUBMERSIBLE
THREAD LENGTH0.440 INCHES NOMINAL
UNTHREADED PORTION LENGTH0.840 INCHES NOMINAL
VOLTAGE IN VOLTS12.0


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us